Good tips of the maintance of the road rollers

Good tips of the maintance of the Road Rollers

Next, I will mainly talk to you about the maintenance of the hydraulic system of the road roller. Of course, there are other structures that also need maintenance, such as the vibrating wheel, the main clutch and so on. Briefly:

1. Check whether the mounting bolts of the filter, valve, motor, oil pump, oil cylinder, etc. are loose, and whether there is oil leakage at each joint.

2. Observe the oil level gauge on the side of the fuel tank. When the hydraulic oil is too low, the filtered hydraulic oil of the same brand should be added.

3. The hydraulic oil tank should be cleaned once a year and the oil should be changed. When adding or changing oil, be careful not to mix impurities and dirt into the oil tank. The new oil added or changed must be filtered in advance.

4. Use No. 68 anti-wear hydraulic oil for hydraulic oil.

5. The hydraulic oil filter should be cleaned or replaced after every 500 hours of use.