The tips of solar photovoltaic drilling machine usage

Whether it is a solar photovoltaic drilling machine or a loading guardrail Pile Driver, the most important thing is of course the drill bit, and the wear of the drill bit is a very normal phenomenon. But when abnormal wear and tear occurs, we need to find out the cause and try to avoid it. Today, the piling drilling machine manufacturer will explain to you the precautions for the use of solar photovoltaic drilling machines:

1. After starting the engine, it should run at low speed for 3-5 minutes, and turn the power head under no load, so as to facilitate the normal operation of the hydraulic system.

2. During the working process of the drilling rig, the operator should always observe whether the indications of various instruments are normal, and if there is any abnormal situation, they should stop and check in time.

3. When operating, pay special attention to operating the control handle in place to avoid pressure shock to the system.

4. In the process of use, check and fasten the pipe joints and oil pump fastening bolts with pressure vibration to ensure that there is no oil leakage or air leakage.

5. The solar photovoltaic drilling machine must be directed by a special person when walking, and special attention should be paid to dangerous areas such as high-voltage lines and puddles.

6. It is strictly forbidden to stand in the rotation range of the drilling rig.

7. After the transfer process of the solar photovoltaic drilling machine, the crawler must be stretched out immediately after getting off the flatbed truck.

8. When checking the hydraulic oil, wait for the hydraulic oil to cool before proceeding.

9. When electric welding drill pipe parts, the power switch must be turned off.

10. Regularly check the rotary joint.